TuBore™ Sanitary valves

The TuBore™ series is Habonim’s line of sanitary ball valves for the pharmaceutical, bioprocessing, food and beverage industries. The valves comply with ASME BPE standard for applications in which sterility, cleanability and drainability are essential for product quality.

Because the TuBore™ valve port diameter is identical to the tube inner diameter, no expansion or contraction can take place inside the system resulting in full drainage and no traces that could cause contamination. The TuBore™ line excels at maximum flow capacity and minimum pressure drop and provides low-torque tight shutoff. The TuBore™ series is grouped into three geometric designs according to the ASME BPE, ISO 1127 and DIN 11850 tube dimension specifications.

Only FDA and USP Class VI compliant polymers or elastomers are used in the TuBore™ series. To avoid rouging on austenitic stainless steel surfaces and corrosion attack on welding areas, low ferrite cast or forged bar materials are used and polished. Upon request, electro-polished surface finishes are available. Purge and drain ports are available upon request to facilitate CIP/SIP operation.

Diverter and various multiport configurations based on the TuBore™ model are also available.

General Information

Technical summary

48 series TuBore™
Size range 3/8" - 6 (DN10 - DN150) Series depended
Pressure range Vacuum 10-6 Tor to 50 bar (750 psi)
Temperature range -60 °C to +230 °C (-76 °F to +446 °F)
Materials Stainless steel A351 CF3M, A479 316L, EN 10222-5 1.4435, Alloy C22, Alloy C276
End connections Welded, clamped
Operation Lever or gear operated, pneumatic or electric actuation
Service Pharmaceutical , bioprocessing, cosmetics, food & beverage

Standards of compliance

Factory certification ISO 9001-2008 Quality management system
Valve design & tests ASME BPE Valve design
ISO 1127 Stainless steel tubes - Dimensions and tolerances
DIN 11850 (Range 2) Stainless steel tubes - Dimensions and tolerances
EN 12266-1, API 598 Testing of metallic valves - Pressure tests, test procedures and acceptance criteria.
API 607, ISO 10497 Testing of valves - Fire type-testing requirements
ISO 15848-1 Industrial valves - measurement, test and qualification procedures for fugitive emissions
Certifications PED 2014/68/EU Module H Pressure equipment directive
ATEX 2014/34/EU Equipment and protective systems intended for use in potentially explosive atmospheres (optional for actuated unit only)
Documentation EN 10204 2.2 / 3.1 / 3.2 Metallic materials - types of inspection documents

ASME BPE standard

48X Series ASME BPE

Size range:

1/2”- 1 1/2” (DN15-DN40)

Pressure range:

Class 300

Technical Information

48X Series ASME BPE

Size range:

2”- 6” (DN50-DN150)

Pressure range:

Class 150

Technical Information

48G Series ASME BPE

Size range:

1/2”- 1 1/2” (DN15-DN40)

Pressure range:

Class 300

Technical Information

48G Series ASME BPE

Size range:

2”- 6” (DN50-DN150)

Pressure range:

Class 150

Technical Information

ISO 1127 standard

48X Series ISO 1127

Size range:

3/8”- 1 1/4” (DN10-DN32)

Pressure range:

Class 300

Technical Information

48X Series ISO 1127

Size range:

11/2”- 3” (DN40-DN80)

Pressure range:

Class 150

Technical Information

48G Series ISO 1127

Size range:

3/8”- 1 1/4” (DN10-DN32)

Pressure range:

Class 300

Technical Information

48G Series ISO 1127

Size range:

11/2”- 3” (DN40-DN80)

Pressure range:

Class 150

Technical Information

DIN 11850 standard

48X Series DIN 11850

Size range:

3/8”- 1 1/2” (DN10-DN40)

Pressure range:

Class 300

Technical Information

48X Series DIN 11850

Size range:

2”- 4” (DN50-DN100)

Pressure range:

Class 150

Technical Information

48G Series DIN 11850

Size range:

3/8”- 1 1/2” (DN15-DN40)

Pressure range:

Class 300

Technical Information

48G Series DIN 11850

Size range:

2”- 4” (DN50-DN100)

Pressure range:

Class 150

Technical Information
Product Catalog
.