High Temperature (Metal Seated) Ball Valve

Up to 650°C (1200°F) Up to 538°C (1000°F) Up to 400°C (752°F) Metal Seated Ball Valve up to 260°C (500°F)

> Valves > HIGH TEMPERATURE

Serving high-end applications with ball valves for high temperatures and abrasive mediums is within our unique expertise developed over decades. Meticulously engineered, constructed and tested with careful metallurgical selection of all valve parts, using special surface finishing and treatments, hard coatings, and thorough analyses of mechanical strength and thermal expansion, ensure that our High Temperature (metal seated) valves are a proven choice for the industries toughest and most demanding applications.

High Temp. (MTM) catalog EN

Valves Design: Top Entry Trunnion Mounted Ball Floating Ball

Up to 650°C (1200°F)

Array ( [introduction_text] =>

High Pressure High Temperature Class 2500, full differential pressure for sizes up to and including 2″ (DN50), differential pressure of up to 255 bar (3700 psi) for sizes 2½” (DN65) and above with hybrid seats.

Pressure containing parts are in compliance with ASME B16.34, for wall thickness, design type-tested for burst testing of four times the pressure rating for 5 minutes. A one-size-up stem made of high tensile material complies with ASME B16.34 and API 6D for drive train requirements provides a sufficient safety factor during operation. A special hybrid seat design is comprised of a metal housing and polymer insert machined as a single unit which provides bubble tight shut-off (Rate A), combined with lower operating torque.

The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles the torque and cut by half the piston travel of standard pneumatic actuators.
The superior performance is achieved by Habonim’s patented four piston design, which generates torque around a centrally located piston, this translates into:
• Double the power for the same size actuator or Half the size for the same amount of power
• Much faster opening and closing time.
A full range of Mounting Kits is available, allowing optimized mounting and use of the COMPACT actuator for valve automation with Habonim’s valves and simple integration with valves that have a standard ISO-plate mounting interface.
Valve Automation Packages is offered based on Habonim’s standard and costume made valves and actuators or as costume made packages with valves, actuators and top-works per customer requests.

Stainless Steel, alloys, Carbon Steel – selected to meet temperature and application. ASME
B16.34 listed cast or forged material for the valve body and ends.
Surface treatments & coatings – LTPN, HVOF Cr₃ C₂ (Chromium Carbide), HVOF WC-Co
(Tungsten Carbide) and Stellite.

)[1] => Array ( [title] => Robust design: [list] =>

Pressure containing parts are in compliance with ASME B16.34 (with modifications for
some series).
Leak rate to EN12266-1 Rate B (factory tested) is achieved by accurate grinding and
lapping processes.
Constant preloading of ball/seats set obtained by Inconel 718 Belleville spring.

)[2] => Array ( [title] => Pressure tested: [list] =>

Designs are burst proof tested for 4 times the maximal working pressure.
Designed and tested per testing & acceptance criteria ANSI/FCI 70-2.

Z28M

Size range

1⁄4”- 6” (DN8-DN150)

Pressure range:

Class #2500, 414 bar, 6000 psi

Array ( [introduction_text] =>

-60°C to 650°C (-76°F to 1200°F) only with body & ends material code H/J V-ball or Shaped seat (V or slot) for control applications

Standard or full port design, forged or cast
ANSI B16.34 Class 900 (wall thickness), size ¼”-2” (DN8-DN50)
ANSI B16.34 Class 400 (wall thickness), size 2 ½”-6” (DN65-DN150)

Stainless Steel, alloys, Carbon Steel – selected to meet temperature and application. ASME
B16.34 listed cast or forged material for the valve body and ends.
Surface treatments & coatings – LTPN, HVOF Cr₃ C₂ (Chromium Carbide), HVOF WC-Co
(Tungsten Carbide) and Stellite.

)[1] => Array ( [title] => Robust design: [list] =>

Pressure containing parts are in compliance with ASME B16.34 (with modifications for
some series).
Leak rate to EN12266-1 Rate B (factory tested) is achieved by accurate grinding and
lapping processes.
Constant preloading of ball/seats set obtained by Inconel 718 Belleville spring.

)[2] => Array ( [title] => Pressure tested: [list] =>

Designs are burst proof tested for 4 times the maximal working pressure.
Designed and tested per testing & acceptance criteria ANSI/FCI 70-2.

Z47M

Size range

1⁄4”- 8” (DN8-DN200)

Pressure range:

Class #600, 100 bar, 1500 psi

Up to 538°C (1000°F)

Z96T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #2500, 414 bar, 6000 psi

Z95T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #1500, 250 bar, 3750 psi

Z91T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #150, 20 bar, 290 psi

Z92T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #150/300, 20/50 bar, 290/750 psi

Z93T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #600, 100 bar, 1500 psi

Z94T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #900, 150 bar, 2250 psi

Z81T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #150, 20 bar, 290 psi

Z82T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #300, 50 bar, 750 psi

Z83T

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #600, 100 bar, 1500 psi

Z47T

Size range

1⁄4”- 8” (DN8-DN200)

Pressure range:

Class #600, 100 bar, 1500 psi

Z73T

Size range

1⁄2”- 8” (DN15-DN200)

Pressure range:

Class #150, 20 bar, 290 psi

Z74T

Size range

1 1/4”- 8” (DN32-DN200)

Pressure range:

Class #300, 50 bar, 750 psi

Z77T

Size range

3”- 6” (DN80-DN150)

Pressure range:

Class #150, 20 bar, 290 psi

Z78T

Size range

1 1/4”- 2 1/2” (DN32-DN65)

Pressure range:

Class #300, 50 bar, 750 psi

Up to 400°C (752°F)

Z96P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #2500, 414 bar, 6000 psi

Z95P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #1500, 250 bar, 3750 psi

Z28P

Size range

1⁄4”- 6” (DN8-DN150)

Pressure range:

Class #2500, 414 bar, 6000 psi

Z91P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #150, 20 bar, 290 psi

Z92P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #300, 50 bar, 750 psi

Z93P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #600, 100 bar, 1500 psi

Z94P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #900, 150 bar, 2250 psi

Z81P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #150, 20 bar, 290 psi

Z82P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #300, 50 bar, 750 psi

Z83P

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #600, 100 bar, 1500 psi

Z47P

Size range

1⁄4”- 8” (DN8-DN200)

Pressure range:

Class #600, 100 bar, 1500 psi

Z73P

Size range

1⁄2”- 8” (DN15-DN200)

Pressure range:

Class #150, 20 bar, 290 psi

Z74P

Size range

1 1/4”- 8” (DN32-DN200)

Pressure range:

Class #300, 50 bar, 750 psi

Z77P

Size range

3”- 6” (DN80-DN150)

Pressure range:

Class #150, 20 bar, 290 psi

Z78P

Size range

1 1/4”- 2 1/2” (DN32-DN65)

Pressure range:

Class #300, 50 bar, 750 psi

Metal Seated Ball Valve up to 260°C (500°F)

Z96W

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #2500, 414 bar, 6000 psi

Z95W

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #1500, 250 bar, 3750 psi

Z28W

Size range

1⁄4”- 6” (DN8-DN150)

Pressure range:

Class #2500, 414 bar, 6000 psi

Z91W

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #150, 20 bar, 290 psi

Z92W

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #300, 50 bar, 750 psi

Z93W

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #600, 100 bar, 1500 psi

Z94W

Size range

2”-12” (DN50-DN300)

Pressure range:

Class #900, 150 bar, 2250 psi

Z47W

Size range

1⁄4”- 8” (DN8-DN200)

Pressure range:

Class #600, 100 bar, 1500 psi

Z73W

Size range

1⁄2”- 8” (DN15-DN200)

Pressure range:

Class #150, 20 bar. 290 psi

Z74W

Size range

1 1/4”- 8” (DN32-DN200)

Pressure range:

Class #300, 50 bar, 750 psi

Z77W

Size range

3”- 6” (DN80-DN150)

Pressure range:

Class #150, 20 bar, 290 psi

Z78W

Size range

1 1/4”- 2 1/2” (DN32-DN65)

Pressure range:

Class #300, 50 bar, 750 psi

PERFORMING IN DEMANDING APPLICATIONS